Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D6164/D6164M-16
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
NORMA vydaná dňa 1.11.2016
Informácie o norme:
Označenie normy: ASTM D6164/D6164M-16
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2016
Kód tovaru: NS-668347
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM D6164/D6164M-16 :
Keywords:
modified bituminous sheet, polyester reinforcement, styrene butadiene styrene (SBS), thermoplastic elastomer,, ICS Number Code 91.100.500 ()
Doplňujúce informácie
| 1. Scope | ||||||
|
1.1 This specification covers prefabricated modified bituminous sheet materials reinforced with polyester fabric as the primary reinforcement, (see Note 1) with or without granules, which use styrene butadiene styrene (SBS) thermoplastic elastomer as the primary modifier and are intended for use in the fabrication of multiple ply roofing and waterproofing membranes. Note 1: Many modified bituminous sheets are currently marketed
with polyester mat reinforced with glass yarns to improve
processing in the manufacture of the finished modified bitumen
product and to reduce distortions that may be introduced during
production. These glass yarns are typically a small percentage of
the reinforcement and do not contribute to the physical properties
of the finished product so much as to make these products be
classified by Specification D6162/D6162M.
1.2 This specification is intended as a material specification only. Issues regarding the suitability of the specific roof constructions or application techniques are beyond this scope. 1.3 The specified tests and property limits used to characterize the sheet materials are intended to establish minimum properties. In-place roof system design criteria, such as fire resistance, field strength, impact/puncture resistance, material compatibility, uplift resistance, and others, are factors beyond the scope of this material specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. |
||||||
| 2. Referenced Documents | ||||||
|
Doporučujeme:
