Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
Automaticky preložený názov:
Štandardná prax Terénne Odber vzoriek náterových filmov pre analýzu ťažkých kovov
NORMA vydaná dňa 1.11.2012
Označenie normy: ASTM D5702-07(2012)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2012
Kód tovaru: NS-32190
Počet strán: 2
Približná hmotnosť: 6 g (0.01 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
coating film sampling, coating film identification, hazardous elements, heavy metals, paint film identification, paint film sampling, sampling, ICS Number Code 13.040.01 (Air quality in general)
Significance and Use | ||||||
3.1 Prior to beginning a project that involves the removal, cutting, grinding, or burning of paint, it is necessary to determine if the coating contains hazardous materials, such as lead, as certain requirements for worker and environmental protection may need to be imposed. The presence and quantity of hazardous materials in a paint can be determined through laboratory analysis; however, since the analysis is based on the weight of the specimen, the removal of the sample must be properly controlled to improve the reliability of the test results. The number and location of samples to be removed must also be determined to characterize properly the extent of the presence of hazardous materials, if any, on a structure. |
||||||
1. Scope | ||||||
1.1 This practice covers a method to control the removal of samples of coating films from substrates for subsequent laboratory analysis for heavy metal content on a mass basis. This technique can be used in the field, the fabricating shop, or laboratory. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Practice for Nondestructive
Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied
to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied
to Non-Ferrous Metals Standard Test Method for Nondestructive
Measurement of Dry Film Thickness of Applied Organic Coatings Using
an Ultrasonic Coating Thickness Gage Standard Practices for Measurement of Dry
Film Thickness of Protective Coating Systems by Destructive,
Cross-Sectioning Means (Includes all amendments and changes
7/1/2022). |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-17 (Počet položiek: 2 902 148)
© Copyright 2024 NORMSERVIS s.r.o.