Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
NORMA vydaná dňa 1.11.2016
Označenie normy: ASTM D3138-04(2016)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2016
Kód tovaru: NS-668470
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
ICS Number Code 83.180 (Adhesives)
1. Scope | ||||||||||||||||||||
1.1 This specification provides general requirements for solvent cements used in joining acrylonitrile-butadiene-styrene (ABS) plastic pipe or fittings to poly(vinyl chloride) (PVC) plastic pipe or fittings. 1.2 These cements are intended for use in cementing transition joints between ABS and PVC materials in non-pressure applications only (25 psi (170 kPa) or less). Note 1: This specification was developed to provide a means
for joining an ABS non-pressure piping system using a
solvent-cemented transition joint, for example, joining ABS
building drain to a PVC sewer system. The intention was not to
create a specification for an all purpose ABS-PVC solvent cement
that would be used for mixing of ABS and PVC piping materials nor
to specify a cement that could generally be used for either
material. Specific cements for ABS or PVC components should be used
(see 1.3).
1.3 Solvent cements used for joining PVC pipe and fittings are specified in Specification D2564. Solvent cements used for joining ABS pipe and fittings are specified in Specification D2235. 1.4 A recommended procedure for joining ABS to PVC pipe and fittings for non-pressure applications is given in the appendix. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following safety hazards caveat pertains
only to the test methods portion, Section 6, of this specification:
Standard Specification for Solvent
Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe
and Fittings Standard Terminology Relating to Plastic
Piping Systems Standard Practice for Safe Handling of
Solvent Cements, Primers, and Cleaners Used for Joining
Thermoplastic Pipe and Fittings Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,
Waste, and Vent Pipe and Fittings Standard Classification System and Basis
for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds
and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds Standard Specification for Solvent Cement
for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and
Fittings Standard Specification for Poly(Vinyl
Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and
Fittings Standard Test Methods for Viscosity of
Adhesives Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) Standard Specification for Solvent
Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-28 (Počet položiek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.