Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Carbon Black Content in Olefin Plastics
Automaticky preložený názov:
Štandardná skúšobná metóda pre sadzí v olefínov, plastov
NORMA vydaná dňa 1.8.2014
Označenie normy: ASTM D1603-14
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.8.2014
Kód tovaru: NS-17822
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
carbon black, content, gravimetric, plastics, polyolefins, ICS Number Code 83.080.10 (Thermosetting materials)
Significance and Use | ||||||||||
4.1 The information provided by this test method is useful for manufacturing quality control, technical service, and research purposes; and is required by various material specifications and for the calculation of optical absorptivity. 4.2 Test Method D4218 is available for determining the carbon black content of polyethylene compounds if so desired. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the determination of the carbon black content in polyethylene, polypropylene, and polybutylene plastics. Its use with acrylic or other polar monomer modifications which might affect the accuracy is not recommended. Determinations of carbon black content are made gravimetrically after pyrolysis of the sample under nitrogen. This test method is not applicable to compositions that contain nonvolatile pigments or fillers other than carbon black. 1.1.1 This test method is not applicable to materials containing brominated flame retardant additives at the end. 1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are given for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: This standard and ISO 6964-1986(E) address the same
subject matter, but differ in technical content.
|
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
15.10.2011
Historická
1.8.2014
Historická
1.10.2013
Historická
1.10.2012
Historická
1.10.2012
Historická
1.12.2009
Posledná aktualizácia: 2024-05-07 (Počet položiek: 2 897 585)
© Copyright 2024 NORMSERVIS s.r.o.