Keywords: color differences, color equations, color measurement, glaze color, light reflectance, tristimulus ,, ICS Number Code 91.100.25 (Terracotta building products)
Doplňujúce informácie
Significance and Use
5.1?This
test method describes the means of determining the LRV of a tile
specimen. Certain building codes require the use of materials rated
by LRV. Application of this test method provides the means for
rating ceramic tile. LRVs reported for ceramic tile should include
reference to the observer and illuminant for which the rating is
valid.
5.2?LRV
is a property dependent on the overall color of a tile specimen.
Control of LRV is achieved through control of color and adherence
to color specifications will govern the acceptability of a product
with respect to LRV. Therefore, a product cannot be judged as
having an unacceptable LRV unless the color of the product is found
to be unacceptable.
5.3?Mixtures of several tile products are
commonly installed on a surface, requiring a means to calculate LRV
for a product mix. The rating obtained for an individual tile
product can be used to calculate the LRV for a product mix using
the following equation:
FIG.
2 Example of Product Mix Used on Surface
5.4?The
test method described herein provides instrumental means as the
basis for judging color difference. Magnitude of color difference
between pairs of ceramic tile can be determined and expressed in
numerical terms.
5.5?Based on interlaboratory
investigation,5.6?The
test method requires the use of multiple illuminants for the
determination of color difference between solid-colored tiles.
Evaluation under incandescent, fluorescent and daylight illuminant
conditions ensure the color differences calculated between a test
and reference specimen account for the possible occurrence of
metamerism.
1. Scope
1.1?This
test method covers the measurement of Light Reflectance Value (LRV)
and visually small color difference between pieces of glazed or
unglazed ceramic tile, using any spectrophotometer that meets the
requirements specified in the test method. LRV and the magnitude
and direction of the color difference are expressed numerically,
with sufficient accuracy for use in product specification.
1.2 LRV
may be measured for either solid-colored tile or tile having a
multicolored, speckled, or textured surface. For tile that are not
solid-colored, an average reading should be obtained from multiple
measurements taken in a pattern representative of the overall
sample as described in 9.2 of
this test method. Small color difference between tiles should only
be measured for solid-color tiles. Small color difference between
tile that have a multicolored, speckled, or textured surface are
not valid.
1.3?For
solid colored tile, a comparison of the test specimen and reference
specimen should be made under incandescent, fluorescent and
daylight illuminant conditions. The use of multiple illuminants
allows the color difference measurement to be made without the risk
of wrongly accepting a match when the tiles being compared are
metamers (see 3.1.4).
1.4?The
values stated in inch-pound units are to be regarded as standard.
The values given in parentheses are provided for information only
and are not considered standard.
1.5?This standard does not purport to
address all of the safety concerns, if any, associated with its
use. It is the responsibility of the user of this standard to
establish appropriate safety, health, and environmental practices
and determine the applicability of regulatory limitations prior to
use.
1.6?This international standard was
developed in accordance with internationally recognized principles
on standardization established in the Decision on Principles for
the Development of International Standards, Guides and
Recommendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.
Technické cookies
Tieto cookies sú nevyhnutné pro správne fungovanie webu a všetkých funkcií, ktoré webové stránky ponúka. Technické cookies nemôžu byť vypnuté, pretože sú zodpovedné za uchovávanie produktov v košíku, nastavenie filtrov, prevedenie nákupného procesu, zoznamu obľúbených a nastavenia súkromia.
Analytické cookies nám umožňujú meranie výkonu nášho webu a našich reklamných kampaní. Ich pomocou určujeme počet návštev a zdroje návštev našich webových stránok. Dáta získané pomocou týchto cookies spracovávame súhrnne, bez použitia identifikátorov, ktoré ukazujú na konkrétnych užívateľov nášho webu. Pokiaľ vypnete používanie analytických cookies vo vzťahu k Vašej návšteve, strácame možnosť analýzy výkonu a optimalizácie našich opatrení.
Používame taktiež súbory cookie a ďalšie technológie, aby sme prispôsobili náš obchod potrebám a záujmom našich zákazníkov a pripravili tak pre Vás výnimočné nákupné skúsenosti.
Vďaka použitiu personalizovaných súborov cookie sa môžeme vyvarovať vysvetľovaniu nežiaducich informácií, ako sú nezodpovedajúce odporúčania výrobkov alebo neužitočné mimoriadne ponuky. Navyše nám používanie personalizovaných súborov cookie umožňuje ponúkať vám dodatočné funkcie, ako napríklad odporúčania výrobkov prispôsobených vašim potrebám.
Reklamné cookies používame my alebo naši partneri, aby sme Vám mohli zobraziť vhodné obsahy alebo reklamy tak na našich stránkach, ako aj na stránkach tretích subjektov. Vďaka tomu môžeme vytvárať profily založené na Vašich záujmoch, takzvané pseudonymizované profily. Na základe týchto informácií nie je spravidla možná bezprostredná identifikácia Vašej osoby, pretože sú používané iba pseudonymizované údaje. Ak nevyjadríte súhlas, nebudete príjemcom obsahov a reklám prispôsobených vašim záujmom.