Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Autogenous Strain of Cement Paste and Mortar
Automaticky preložený názov:
Štandardná skúšobná metóda pre plynové kmeňa cementové pasty a maltových
NORMA vydaná dňa 1.10.2014
Označenie normy: ASTM C1698-09(2014)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2014
Kód tovaru: NS-12239
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
autogenous strain, cement paste, length change, mortar,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Significance and Use | ||||||||||||||||||
5.1 Autogenous strain is the self-created bulk strain of cement paste, mortar, or concrete during hardening at constant temperature. In conventional concrete, autogenous shrinkage strain is generally negligible, but in concrete with low water-cementitious materials ratio (w/cm) or with silica fume it may be considerable (5.2 An accurate measurement of the autogenous strain of cementitious mixtures with low w/cm is important for evaluating the risk of early-age cracking of concrete structures. Measurements of autogenous strain have been carried out using either volumetric or linear methods. Both methods may show evidence of significant artifacts (5.3 A sealed, flexible corrugated mold system (5.4 This test method can be used to evaluate the effects of cementitious materials, admixtures, and mixture proportions on autogenous shrinkage strain of paste or mortar specimens. 5.5 The autogenous shrinkage strain of mortar specimens will be less than that of paste specimens for the same 1.1 This test method measures the bulk strain of a sealed cement paste or mortar specimen, including those containing admixtures, various supplementary cementitious materials (SCM), and other fine materials, at constant temperature and not subjected to external forces, from the time of final setting until a specified age. This strain is known as autogenous strain. Autogenous strain is most significant in concrete with low water-cementitious materials ratio (Note 1: A low water-cementitious materials ratio (w/cm) can be considered to be a water to cement ratio of 0.40 or lower for this test. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of
the safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish
appropriate safety and health practices and determine the
applicability of regulatory limitations prior to use.
(
RP 10B-2/ISO 10426-2 Recommended Practice for Testing Well
Cements Standard Specification for Reference
Masses and Devices for Determining Mass and Volume for Use in
Physical Testing of Hydraulic Cements Standard Test Method for Time of Setting
of Concrete Mixtures by Penetration Resistance Standard Terminology Relating to
Hydraulic and Other Inorganic Cements (Includes all amendments and
changes 8/28/2020). Standard Practice for Mechanical Mixing
of Hydraulic Cement Pastes and Mortars of Plastic Consistency Standard Practice for Making and Curing
Concrete Test Specimens in the Laboratory Standard Test Methods for Time of Setting
of Hydraulic Cement by Vicat Needle Standard Terminology Relating to Concrete
and Concrete Aggregates (Includes all amendments and changes
10/14/2021). Standard Test Method for Length Change of
Hardened Hydraulic-Cement Mortar and Concrete |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-30 (Počet položiek: 2 896 468)
© Copyright 2024 NORMSERVIS s.r.o.