Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM C1697-16
Standard Specification for Blended Supplementary Cementitious Materials
NORMA vydaná dňa 1.10.2016
Informácie o norme:
Označenie normy: ASTM C1697-16
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2016
Kód tovaru: NS-665994
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM C1697-16 :
Keywords:
blend, fly ash, pozzolan, silica fume, slag cement, supplementary cementitious material,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Doplňujúce informácie
| 1. Scope | |
|
1.1 This specification covers blended supplementary cementitious materials that result from the blending or intergrinding of two or three ASTM compliant supplementary cementitious materials, for use in concrete or mortar where hydraulic or pozzolanic action, or both, is desired. The supplementary cementitious materials include slag cement conforming to Specification C989/C989M, natural pozzolans and coal fly ash conforming to Specification C618 and silica fume conforming to Specification C1240. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Note 1: The incorporation of supplementary cementitious
materials as separate additions or as a manufactured blend may
significantly alter the properties of fresh and hardened concrete.
The user should be aware of these changes and is referred to the
ACI 232.1R |
Use of Natural Pozzolans in Concrete |
|
ACI 232.2R |
Use of Fly Ash in Concrete |
|
ACI 233R |
Slag Cement in Concrete and Mortar |
|
ACI 234R |
Guide for the Use of Silica Fume in Concrete |
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete |
|
|
Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
|
|
Standard Specification for Silica Fume Used in Cementitious Mixtures |
|
|
Standard Specification for Slag Cement for Use in Concrete and Mortars |
|
|
Standard Test Method for Autoclave Expansion of Hydraulic Cement |
|
|
Standard Specification for Portland Cement |
|
|
Standard Terminology Relating to Concrete and Concrete Aggregates (Includes all amendments and changes 10/14/2021). |
|
|
Standard Test Methods for Chemical Analysis of Hydraulic Cement |
|
|
Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Includes all amendments and changes 3/21/2023). |
