Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Measuring Length of Concrete Cores (Includes all amendments And changes 1/27/2020).
NORMA vydaná dňa 1.6.2016
Označenie normy: ASTM C1542/C1542M-16a
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2016
Kód tovaru: NS-640465
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
concrete, core, jaw caliper, ruler, length measurement,, ICS Number Code 91.080.40 (Concrete structures)
Significance and Use | ||||||||||
4.1 This test method provides two procedures for determining the length of a core obtained in accordance with either Test Method C42/C42M or Test Method C1604/C1604M. This length is used in conjunction with condition surveys, density and voids analysis, and other applications. 4.2 This procedure does not intend to include in the length measurement adhered particles not part of the concrete mixture. 4.3 Test Method C174/C174M also determines the length of concrete cores using a different measuring apparatus and procedure. Note 1: Test Method C174/C174M uses an apparatus that
establishes two parallel planes a known distance apart. The length
of the core is determined by calculation using the known distance
between the two parallel planes and the measured distance from the
upper plane to the top of the core.
|
||||||||||
1. Scope | ||||||||||
1.1 This test method is used to determine the length of a core drilled from concrete. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-30 (Počet položiek: 2 896 468)
© Copyright 2024 NORMSERVIS s.r.o.