Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation (Includes all amendments And changes 3/12/2018).
Automaticky preložený názov:
Štandardné špecifikácie pre 19 Wire Kombinované Unilay reťazcom hliníkových vodičov pre následnú izoláciu
NORMA vydaná dňa 1.4.2013
Označenie normy: ASTM B786/B786M-08(2013)e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-8116
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
aluminum alloy conductors, aluminum electrical conductor, combination stranded conductor, electrical conductor, electrical conductor-aluminum, insulated electrical conductor, stranded conductor, unilay stranded conductor, 8000-series aluminum alloy conductors, ICS Number Code 29.060.20 (Cables)
1. Scope | ||||||||||||||||||||
1.1 This specification covers bare combination unilay-stranded conductors made from round wires of aluminum 1350 and 8000 series of aluminum alloys, for insulated conductors for electrical purposes. Aluminum 1350 wires in tempers -H19 (extra hard), -H16 or -H26 (3/4 hard), -H14 or -H24 (1/2 hard), and -H142 or -H242 (1/2 hard) and 8000 series aluminum alloys wires in tempers “0” and H1X or H2X are permitted. These conductors shall be constructed with a central core wire surrounded by two layers of helically laid wires, resulting in an outer diameter equal to the compressed-stranded equivalent conductors. 1.1.1 For the purpose of this
specification, normal conductor classification (Class AA, A, B, C)
is not applicable, as these conductors are intended for subsequent
insulation. The descriptive term combination unilay-stranded shall
be used in place of conductor classification (Note 2 and Note
3).
1.2 The values stated in either SI
units or inch-pound units are to be regarded separately as
standard. The values stated in each system may not be exact
equivalents; therefore, each system shall be used independently of
the other. Combining values from the two systems may result in
non-conformance with the standard.
|
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Historická
1.4.2010
Historická
1.4.2010
Historická
15.11.2011
Historická
1.4.2012
Historická
1.10.2011
Historická
15.10.2012
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-17 (Počet položiek: 2 902 148)
© Copyright 2024 NORMSERVIS s.r.o.