Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM B745/B745M-15 1.5.2015 náhľad

Doplňujúce informácie

ASTM B745/B745M-15

Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

Automaticky preložený názov:

Štandardné špecifikácie pre vlnité hliníkové trubky pre kanalizácie a Prepady

NORMA vydaná dňa 1.5.2015

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 70.00 € Tlačené - 70.00 €
Dostupnosť	SKLADOM
Cena	70.00 € bez DPH
70.00 €

Informácie o norme:

Označenie normy: ASTM B745/B745M-15
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2015
Kód tovaru: NS-588471
Počet strán: 10
Približná hmotnosť: 30 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Neželezné kovové trubky

Anotácia textu normy ASTM B745/B745M-15 :

Keywords:
aluminum culvert, aluminum storm drains, culvert pipe, storm drain pipe,, ICS Number Code 23.040.15 (Non-ferrous metal pipes)

Doplňujúce informácie

1. Scope

1.1 This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes.

1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth-cover load and sheet thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the sheet thickness. The structural design of corrugated aluminum pipe and the proper installation procedures are given in Practices B790/B790M and B788/B788M, respectively. A procedure for using life-cycle cost analysis techniques to evaluate alternative drainage system designs using corrugated metal pipe is given in Practice A930.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B633-23	Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B695-21	Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
F467M-06a(2018)	Standard Specification for Nonferrous Nuts for General Use (Metric) (Includes all amendments and changes 9/20/2018).
B788/B788M-09(2020)	Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B790/B790M-16(2021)	Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
F467-13(2018)	Standard Specification for Nonferrous Nuts for General Use
C443-21	Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
D1056-20	Standard Specification for Flexible Cellular Materials´Sponge or Expanded Rubber
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A307-21	Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A563-15	Standard Specification for Carbon and Alloy Steel Nuts
A930-09(2020)	Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
B209-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B666/B666M-20	Standard Practice for Identification Marking of Aluminum and Magnesium Products
B744/B744M-15(2020)	Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
F738M-02	Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
F468-23	Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
F468M-06(2018)	Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F568M-07	Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)
F593-22	Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F594-22	Standard Specification for Stainless Steel Nuts
B316/B316M-20	Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B221M-21	Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B221-21	Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
F836M-20	Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) (Withdrawn 2023)
A563M-07	Standard Specification for Carbon and Alloy Steel Nuts [Metric]
B209M-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) (Withdrawn 2021)

Podobné normy:

ASTM B675-02(2013)..

Historická
1.2.2013

ASTM B676-03(2014)..

Historická
1.10.2014

ASTM B677-05(2010)e1..

Historická
1.10.2010

ASTM B698-10

Historická
1.10.2010

ASTM B706-00(2011)..

Historická
1.10.2011

ASTM B722-06(2011)..

Historická
1.12.2006

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.