ASTM B443-00(2009)..
ASTM B444-06(2011)..
ASTM B446-03(2008)e1..
ASTM B473-07(2013)..
ASTM B474-03(2009)..
ASTM B475-07(2013)..
Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B582-07(2013)
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Automaticky preložený názov:
Štandard Specification pre nikel-chróm-železo-molybdén-zliatiny medi Plechy a pásky
NORMA vydaná dňa 1.2.2013
Informácie o norme:
Označenie normy: ASTM B582-07(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2013
Kód tovaru: NS-7270
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM B582-07(2013) :
Keywords:
plate, sheet, strip, N06007, N60975, N06985, N06030, ICS Number Code 77.150.40 (Nickel and chromium products)
Doplňujúce informácie
| 1. Scope | |||||
|
1.1 The specification2 covers plate, sheet, and strip of nickel-chromium-iron-molybdenum-copper alloys (UNS N06007, N06975, N06985, and N06030)* as shown in Table 1, for use in general corrosive service. Element |
Composition Limits, % |
||||
|
|
Alloy N06007 |
Alloy N06975 |
Alloy N06985 |
Alloy N06030 |
|
|
Nickel |
|
remainderA |
47.0 to 52.0 |
remainderA |
remainderA |
|
Chromium |
|
21.0 to 23.5 |
23.0 to 26.0 |
21.0 to 23.5 |
28.0 to 31.5 |
|
Iron |
|
18.0 to 21.0 |
remainderA |
18.0 to 21.0 |
13.0 to 17.0 |
|
Molybdenum |
|
5.5 to 7.5 |
5.0 to 7.0 |
6.0 to 8.0 |
4.0 to 6.0 |
|
Copper |
|
1.5 to 2.5 |
0.70 to 1.20 |
1.5 to 2.5 |
1.0 to 2.4 |
|
Manganese |
|
1.0 to 2.0 |
1.0 max |
1.0 max |
1.5 max |
|
Cobalt, max |
|
2.5 |
... |
5.0 |
5.0 |
|
Carbon, max |
|
0.05 |
0.03 |
0.015 |
0.03 |
|
Tungsten |
|
1.0 max |
... |
1.5 max |
1.5 to 4.0 |
|
Silicon, max |
|
1.0 |
1.0 |
1.0 |
0.8 |
|
Phosphorus, max |
|
0.04 |
0.03 |
0.04 |
0.04 |
|
Sulfur, max |
|
0.03 |
0.03 |
0.03 |
0.02 |
|
Columbium + tantalum |
|
1.75 to 2.50 |
... |
0.50 max |
0.30 to 1.50 |
|
Titanium |
|
... |
0.70–1.50 |
... |
... |
1.2 The following products are
covered under this specification:
1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
Podobné normy:
Historická
1.10.2009
Historická
1.5.2011
Historická
1.3.2008
Historická
1.10.2013
Historická
1.10.2009
Historická
1.10.2013
Odporúčame:
EviZak - všetky zákony vrátane ich evidencie na jednom mieste
Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !
Chcete vedieť viac informácii ? Pozrite sa na túto stránku.
