Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM B359/B359M-18 1.10.2018 náhľad

Doplňujúce informácie

ASTM B359/B359M-18

Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

NORMA vydaná dňa 1.10.2018

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 77.40 € Tlačené - 77.40 €
Dostupnosť	SKLADOM
Cena	77.40 € bez DPH
77.40 €

Informácie o norme:

Označenie normy: ASTM B359/B359M-18
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2018
Kód tovaru: NS-904686
Počet strán: 11
Približná hmotnosť: 33 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Neželezné kovové trubky

Anotácia textu normy ASTM B359/B359M-18 :

Keywords:
condenser, copper, copper alloys, heat exchanger, integral fins, seamless, tube, UNS No. C10100, UNS No. C10200, UNS No. C10300, UNS No. C10800, UNS No. C12000, UNS No. C12200, UNS No. C14200, UNS No. C15630, UNS No. C19200, UNS No. C23000, UNS No. C44300, UNS No. C44400, UNS No. C44500, UNS No. C60800, UNS No. C68700, UNS No. C70400, UNS No. C70600, UNS No. C70620, UNS No. C71000, UNS No. C71500, UNS No. C71520, UNS No. C72200,, ICS Number Code 23.040.15 (Non-ferrous metal pipes)

Doplňujúce informácie

1. Scope

1.1 This specification2 establishes the requirements for seamless copper and copper alloy tubing on which the external or internal surface, or both, has been modified by a cold-forming process to produce an integral enhanced surface for improved heat transfer.

1.2 The tubes are typically used in surface condensers, evaporators, and heat exchangers.

1.3 The product shall be produced of the following coppers or copper alloys, as specified in the ordering information.

Copper or
Copper Alloy
UNS No.

Type of Metal

C10100

Oxygen-free electronic

C10200

Oxygen-free without residual deoxidants

C10300

Oxygen-free, extra low phosphorus

C10800

Oxygen-free, low phosphorus

C12000

DLP Phosphorized, low residual phosphorus
(See Note 1)

C12200

DHP, Phosphorized, high residual phosphorus
(See Note 1)

C14200

DPA Phosphorized arsenical (See Note 1)

C15630

Nickel Phosphorus

C19200

Phosphorized, 1 % iron

C23000

Red Brass

C44300

Admiralty Metal Types B,

C44400

C, and

C44550

C60800

Aluminum Bronze

C68700

Aluminum Brass Type B

C70400

95-5 Copper-Nickel

C70600

90-10 Copper-Nickel

C70620

90-10 Copper-Nickel (Modified for Welding)

Copper or
Copper Alloy
UNS No.

Type of Metal

C71000

80-20 Copper-Nickel Type A

C71500

70-30 Copper-Nickel

C71520

70-30 Copper-Nickel (Modified for Welding)

C72200

Copper-Nickel

Note 1: Designations listed in Classification B224.

1.4 Units—The values stated in either in-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems could result in nonconformance with the specification.

1.5 Product produced in accordance with the Supplementary Requirements section for military applications shall be produced only to the inch-pound system of this specification.

1.6 The following safety hazard caveat pertains only to the test methods described in this specification. 1.7 (1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

B224-16(2022)	Standard Classification of Coppers
B601-18a	Standard Classification for Temper Designations for Copper and Copper Alloys´Wrought and Cast (Includes all amendments and changes 10/24/2018).
B154-16(2022)	Standard Test Method for Mercurous Nitrate Test for Copper Alloys
B153-22	Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
E2575-19	Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
E478-08(2017)	Standard Test Methods for Chemical Analysis of Copper Alloys
E255-23	Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E243-18	Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
E118-89(1996)	Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E53-07	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
E3-11(2017)	Standard Guide for Preparation of Metallographic Specimens
D4727/D4727M-22	Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
B968/B968M-16(2022)	Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B900-16(2022)	Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
B858-06(2018)	Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B846-19a	Standard Terminology for Copper and Copper Alloys (Includes all amendments and changes 8/8/2019).
B170-99(2020)	Standard Specification for Oxygen-Free Electrolytic Copper´Refinery Shapes

Doporučujeme: