ASTM B814-06(2011)..
ASTM B906-02(2012)..
ASTM E272-10
ASTM E571-12
ASTM F2633-13
ASTM F3055-14Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B333-03(2013)
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
Automaticky preložený názov:
Štandard Specification pre nikel-molybdén Plate, list, a Gazy
NORMA vydaná dňa 1.2.2013
Informácie o norme:
Označenie normy: ASTM B333-03(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2013
Kód tovaru: NS-6273
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM B333-03(2013) :
Keywords:
plate, sheet, strip, UNS N10001, UNS N10629, UNS N10665, UNS N10675, UNS N10624, ICS Number Code 77.150.40 (Nickel and chromium products)
Doplňujúce informácie
| 1. Scope | |||||
|
1.1 This specification2 covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Table 1, for use in general corrosive service. Element |
Composition Limits, % |
|
|||
|
Alloy |
Alloy |
Alloy |
Alloy |
Alloy |
|
|
Nickel |
remainderA |
remainderA |
65.0 min |
remainderA |
Bal |
|
Molybdenum |
26.0–30.0 |
26.0–30.0 |
27.0–32.0 |
26.0–30.0 |
21.0-25.0 |
|
Iron |
4.0–6.0 |
2.0 max |
1.0–3.0 |
1.0–6.0 |
5.0-8.0 |
|
Chromium |
1.0 max |
1.0 max |
1.0–3.0 |
0.5–1.5 |
6.0-10.0 |
|
Carbon, max |
0.05 |
0.02 |
0.01 |
0.01 |
0.01 |
|
Silicon, max |
1.0 |
0.10 |
0.10 |
0.05 |
0.10 |
|
Cobalt, max |
2.5 |
1.00 |
3.0 |
2.5 |
1.0 |
|
Manganese, |
1.0 |
1.0 |
3.0 |
1.5 |
1.0 |
|
Phosphorus, |
0.04 |
0.04 |
0.030 |
0.04 |
0.025 |
|
Sulfur, max |
0.03 |
0.03 |
0.010 |
0.01 |
0.01 |
|
Vanadium |
0.2–0.4 |
... |
0.20 max |
... |
... |
|
Nickel plus |
... |
... |
94.0–98.0 |
|
... |
|
Aluminum |
... |
... |
0.50 max |
0.1–0.5 |
0.5 |
|
Columbium |
... |
... |
0.20 |
|
... |
|
Copper, max |
... |
... |
0.20 |
0.5 |
0.5 |
|
Tantalum, |
... |
... |
0.20 |
|
... |
|
Titanium, |
... |
... |
0.20 |
|
... |
|
Tungsten, |
... |
... |
3.0 |
|
... |
|
Zirconium, |
... |
... |
0.10 |
|
... |
|
Magnesium, |
... |
... |
... |
... |
... |
Alloy
Thickness,
in. (mm)
Tensile Strength,
min, psi (MPa)
Yield Strength
(0.2 % Offset),
min, psi (MPa)
Elongation
in 2 in.
(50.8 mm)
or 4DA
min, %
Rockwell
Hardness,B
max
Sheet and Strip
N10001
Under 3/16 (4.76)
115 000 (795)
50 000 (345)
45
100 HRB
N10665
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10675
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10629
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10624
Under 3/16 (4.76)
104 000 (720)
46 000 (320)
40
100 HRB
Plate
N10001
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
100 000 (690)
45 000 (310)
40
100 HRB
N10665
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10675
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10629
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10624
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
104 000 (720)
46 000 (320)
40
100 HRB
1.2 The following products are
covered under this specification:
1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
|
|
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019). |
|
|
Standard Test Methods for Determining Average Grain Size |
Podobné normy:
Historická
1.6.2011
Historická
1.5.2012
Historická
1.1.2010
Historická
1.8.2012
Historická
1.10.2013
Historická
1.2.2014
Odporúčame:
Aktualizácia zákonov
Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-29 (Počet položiek: 2 896 215)
© Copyright 2024 NORMSERVIS s.r.o.
Cookies
Cookie - Nastavenia 
Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.