Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM B283/B283M-19 1.4.2019 náhľad

Doplňujúce informácie

ASTM B283/B283M-19

Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

NORMA vydaná dňa 1.4.2019

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 77.40 € Tlačené - 77.40 €
Dostupnosť	SKLADOM
Cena	77.40 € bez DPH
77.40 €

Informácie o norme:

Označenie normy: ASTM B283/B283M-19
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2019
Kód tovaru: NS-947038
Počet strán: 16
Približná hmotnosť: 48 g (0.11 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Výrobky z mědi

Anotácia textu normy ASTM B283/B283M-19 :

Keywords:
copper and copper alloy die forgings (hot pressed), die forgings (hot pressed), UNS No. C11000, UNS No. C14500, UNS No. C14700, UNS No. C27450, UNS No. C27451, UNS No. C27453, UNS No. C28500, UNS No. C35330, UNS No. C36500, UNS No. C37000, UNS No. C37700, UNS No. C46400, UNS No. C46500, UNS No. C46750, UNS No. C48200, UNS No. C48500, UNS No. C48600, UNS No. C48640, UNS No. C49250, UNS No. C49255, UNS No. C49260, UNS No. C49265, UNS No. C49300, UNS No. C49340, UNS No. C49345, UNS No. C49350

Doplňujúce informácie

1. Scope

1.1 This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method. The following copper and copper alloys are included:

Copper or Copper Alloy UNS No.

Name

C11000

copper

C14500

copper-tellurium

C14700

copper-sulfur

C27450

plumbing brass

C27451

plumbing brass

C27453

copper zinc alloy

C28500

copper-zinc brass

C35330

leaded brass

C36500

leaded Muntz metal

C37000

free-cutting Muntz metal

C37700

forging brass

C46400

naval brass

C46500

naval brass, arsenical

C46750

tin brass

C48200

medium leaded naval brass

C48500

leaded naval brass

C48600

naval brass

C48640

DZR brass

C49250

copper-zinc-bismuth alloy

C49255

copper-zinc-bismuth-nickel alloy

C49260

copper-zinc-bismuth alloy

C49265

copper-zinc-tin-bismuth, low leaded

C49300

copper-zinc-tin-bismuth alloy

C49340

copper-zinc-tin-bismuth alloy

C49345

copper-zinc-tin-bismuth, low leaded

C49350

copper-zinc-tin-bismuth alloy

C49355

bismuth brass

C61900

aluminum bronze

C62300

aluminum bronze, 9 %

C63000

aluminum-nickel bronze

C63200

aluminum-nickel bronze

C64200

aluminum-silicon bronze

C64210

aluminum-silicon bronze, 6.7 %

C65500

high-silicon bronze (A)

C65680

high-silicon bronze

C67500

manganese bronze (A)

C67600

. . .

C69300

copper-zinc-silicon

C69410

copper-zinc-silicon

C69850

copper-zinc-silicon

C70620

copper-nickel 90-10

Copper or Copper Alloy UNS No.

Name

C71520

copper-nickel 70-30

C77400

nickel silver, 45-10

C87700

silicon bronze

C87710

silicon bronze

1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Note 1: Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for welded applications with seawater exposure.

Note 2: Guidelines for design and development of forgings are included in Appendix X2.

Note 3: Wrought product intended for hot forging is described in Specification B124/B124M.

1.3 The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

ASME
B846-19a	Standard Terminology for Copper and Copper Alloys (Includes all amendments and changes 8/8/2019).
B249/B249M-23	Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
ISO 7602	Determination of Tellurium Content (High Content)Flame Atomic Absorption Spectrometric Method Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
B124/B124M-20	Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

E75-76(1996)	Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
	Method for Determination of Bismuth in Copper and Copper Alloys Available from Japanese Standards Association (JSA), Mita MT Bldg., 3-13-12 Mita, Minato-ku, Tokyo, 108-0073, Japan, http://www.jsa.or.jp. (Japanese Industrial Standards)
MIL-STD-792
E478-08(2017)	Standard Test Methods for Chemical Analysis of Copper Alloys

Odporúčame:

EviZak - všetky zákony vrátane ich evidencie na jednom mieste

Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !

Chcete vedieť viac informácii ? Pozrite sa na túto stránku.