Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM B152/B152M-13 15.1.2013 náhľad

Doplňujúce informácie

ASTM B152/B152M-13

Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

Automaticky preložený názov:

Štandardné špecifikácie pre medené plechy, pásy, dosky a vývalkov

NORMA vydaná dňa 15.1.2013

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 70.00 € Tlačené - 70.00 €
Dostupnosť	SKLADOM
Cena	70.00 € bez DPH
70.00 €

Informácie o norme:

Označenie normy: ASTM B152/B152M-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.1.2013
Kód tovaru: NS-5499
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Výrobky z mědi

Anotácia textu normy ASTM B152/B152M-13 :

Keywords:
annealed, copper bars, copper plate, copper sheet, copper strip , hot-rolled, rolled, UNS No. C10100, UNS No. C10200, UNS No. C10300, UNS No. C10400, UNS No. C10500, UNS No. C10700, UNS No. C10800, UNS No. C10910, UNS No. C11000, UNS No. C11300, UNS No. C11400, UNS No. C11600, UNS No. C12000, UNS No. C12200, UNS No. C12300, UNS No. C14200, UNS No. C14420, UNS No. C14530, ICS Number Code 77.150.30 (Copper products)

Doplňujúce informácie

1. Scope

1.1 This specification² establishes the requirements for copper sheet, strip, plate, and rolled bar produced from the following coppers.

Copper
UNS No.^A

Previous
Designation

Type of Copper

C10100^B

OFE

Oxygen-free electronic

C10200^B

Oxygen-free without residual
deoxidants

C10300

...

Oxygen-free extra low phosphorus

C10400, C10500, C10700

OFS

Oxygen-free, silver bearing

C10800

...

Oxygen-free low phosphorus

C10910

...

Low oxygen

C11000^B^,^C

ETP,
TP^C

Electrolytic tough pitch^C, Tough pitch^C

C11300, C11400, C11600^B

STP

Silver bearing tough pitch

C12000

DLP

Phosphorized, low residual phos-
phorus

C12200^B

DHP

Phosphorized, high residual phos-
phorus

C12300

DPS

Phosphorized, silver bearing

C14200

DPA

Phosphorus deoxidized, arsenical

C14420

...

Tin bearing tellurium copper

C14530

...

Tin tellurium bearing copper

_______________

1.1.1 When a specific copper is not identified in the contract or purchase order, the supplier may furnish product from any of the listed coppers.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 The following safety hazards caveat only pertains to the test method portion, Section 13 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
B170-99(2020)	Standard Specification for Oxygen-Free Electrolytic Copper´Refinery Shapes
ASME	Boiler Pressure Vessel Code Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Three Park Ave., New York, NY 10016-5990, http://www.asme.org.
B193-20	Standard Test Method for Resistivity of Electrical Conductor Materials
B216-22	Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
B224-16(2022)	Standard Classification of Coppers
B248-22	Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M-22	Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
B272-12(2019)	Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
E478-08(2017)	Standard Test Methods for Chemical Analysis of Copper Alloys
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E53-07	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E8M-04	Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008)
E8-04	Standard Test Methods for Tension Testing of Metallic Materials
E3-11(2017)	Standard Guide for Preparation of Metallographic Specimens
B11-78	Specification for Copper Plates for Locomotive Fireboxes (Withdrawn 1980)
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
B601-18a	Standard Classification for Temper Designations for Copper and Copper Alloys´Wrought and Cast (Includes all amendments and changes 10/24/2018).
B370-22	Standard Specification for Copper Sheet and Strip for Building Construction
B577-19	Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B846-19a	Standard Terminology for Copper and Copper Alloys (Includes all amendments and changes 8/8/2019).