ASTM A711/A711M-07(2..
ASTM A727/A727M-13..
ASTM A745/A745M-12..
ASTM A768/A768M-05(2..
ASTM A788/A788M-14..
ASTM A836/A836M-13..
Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM A915/A915M-08(2013)
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
Automaticky preložený názov:
Štandardné špecifikácie pre oceľové odliatky, Carbon a zliatiny, chemickej Požiadavky Podobne ako štandardné tepaný stupňa
NORMA vydaná dňa 1.4.2013
Informácie o norme:
Označenie normy: ASTM A915/A915M-08(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-4792
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM A915/A915M-08(2013) :
Keywords:
alloy steel, carbon steel, steel castings, ICS Number Code 77.140.85 (Iron and steel forgings)
Doplňujúce informácie
| 1. Scope | ||||||||
|
1.1 This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades. 1.2 Several grades are covered and are designated by chemical composition shown in Table 1. Grade |
C |
Mn |
P, max |
S, max |
Si |
Ni |
Cr |
Mo |
|
|
||||||||
|
SC 1020 |
0.18/0.23 |
0.40/0.80 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1025 |
0.22/0.28 |
0.40/0.80 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1030 |
0.28/0.34 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1040 |
0.37/0.44 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1045 |
0.43/0.50 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 4130 |
0.28/0.33 |
0.40/0.80 |
0.035 |
0.040 |
0.30/0.60 |
. . . |
0.80/1.10 |
0.15/0.25 |
|
SC 4140 |
0.38/0.43 |
0.70/1.10 |
0.035 |
0.040 |
0.30/0.60 |
. . . |
0.80/1.10 |
0.15/0.25 |
|
SC 4330 |
0.28/0.33 |
0.60/0.90 |
0.035 |
0.040 |
0.30/0.60 |
1.65/2.00 |
0.70/0.90 |
0.20/0.30 |
|
SC 4340 |
0.38/0.43 |
0.60/0.90 |
0.035 |
0.040 |
0.30/0.60 |
1.65/2.00 |
0.70/0.90 |
0.20/0.30 |
|
SC 8620 |
0.18/0.23 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
|
SC 8625 |
0.23/0.28 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
|
SC 8630 |
0.28/0.33 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3.1 Within the text, the SI units are shown in brackets.
1.3.2 Inch-pound units are applicable for material ordered to Specification A915 and SI units for material ordered to Specification A915M.
|
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
