Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM A703/A703M-17a 1.11.2017 náhľad

Doplňujúce informácie

ASTM A703/A703M-17a

Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts (Includes all amendments And changes 5/4/2018).

NORMA vydaná dňa 1.11.2017

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 76.60 € Tlačené - 76.60 €
Dostupnosť	SKLADOM
Cena	76.60 € bez DPH
76.60 €

Informácie o norme:

Označenie normy: ASTM A703/A703M-17a
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2017
Kód tovaru: NS-800155
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Železné a ocelové odlitky

Anotácia textu normy ASTM A703/A703M-17a :

Keywords:
castings, general requirements, pressure containing, steel,, ICS Number Code 77.140.80 (Iron and steel castings)

Doplňujúce informácie

1. Scope

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in an individual specification, shall apply to steel castings for pressure-containing parts under each of the following ASTM specifications:

Title of Specification

ASTM Designation

Steel Castings, Carbon, Suitable for Fusion Welding,

A216/A216M

for High-Temperature Service

Steel Castings, Martensitic Stainless and Alloy, for

A217/A217M

Pressure-Containing Parts, Suitable for High-

Temperature Service

Castings, Austenitic, Austenitic-Ferritic (Duplex),

A351/A351M

Pressure-Containing Parts

Steel Castings, Ferritic and Martensitic, for Pressure-

A352/A352M

Containing Parts, Suitable for Low-Temperature

Service

Steel Castings, Alloy, Specially Heat-Treated, for

A389/A389M

Pressure-Containing Parts, Suitable for High-

Temperature Service

Steel Castings Suitable for Pressure Service

A487/A487M

Castings, Iron-Nickel-Chromium and Nickel

A990/A990M

Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

Castings, Austenitic-Ferritic (Duplex)

A995/A995M

Stainless Steel, for Pressure-Containing Parts

1.2 This specification also covers a group of supplementary requirements which may be applied to the above specifications as indicated therein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.

1.3 In case of conflict between the requirements of the individual specification and this general specification, the former shall prevail.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

A380-06	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
E446-20	Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
A487/A487M-21	Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M-18e2	Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel (Includes all amendments and changes 2/12/2020).
A609/A609M-12(2023)	Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A800/A800M-20	Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
A217/A217M-22	Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A351/A351M-18e1	Standard Specification for Castings, Austenitic, for Pressure-Containing Parts (Includes all amendments and changes 8/27/2019).
A352/A352M-21	Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A216/A216M-21	Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
E709-21	Standard Guide for Magnetic Particle Testing
A802-A802M-95(2001)	Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A903/A903M-99(2024)	Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A941-23	Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A967-05	Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A990-11	Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A991/A991M-22	Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A995/A995M-20	Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A1058-19	Standard Test Methods for Mechanical Testing of Steel Products´Metric
A1067/A1067M-12a(2018)	Standard Specification for Test Coupons for Steel Castings (Includes all amendments and changes 3/9/2018).
A1080-15	Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E94-04	Standard Guide for Radiographic Examination
E125-63(2023)	Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E165-09	Standard Practice for Liquid Penetrant Examination for General Industry
B16.5	Pipe Flanges and Flanged Fittings
E186-20	Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings
E208-20e1	Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels (Includes all amendments and changes 2/9/2023).
E280-21	Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
E340-23	Standard Practice for Macroetching Metals and Alloys
E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
A389/A389M-13(2018)	Standard Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service